Enterasys Networks 4G4282-49 사용자 설명서
DFE-Gold Module Shutdown Procedure
4-8 Troubleshooting
When a controlled shutdown is initiated from the OFFLINE/RESET
switch
, you have 60
seconds from the time the CPU starts alternately flashing amber/off until the device
automatically restarts.
automatically restarts.
Last Resort Shutdown Procedure Using OFFLINE/RESET Switch
To reset a DFE‐Gold module without it performing an orderly shutdown routine,
press and hold the OFFLINE/RESET switch for approximately 6 seconds.
Removing any DFE‐Gold module from the chassis before it has been shut down is not
recommended. The only safe time to remove a module from the chassis is after the
completion of a shutdown and the management LED is alternately flashing amber/off.
recommended. The only safe time to remove a module from the chassis is after the
completion of a shutdown and the management LED is alternately flashing amber/off.
Note: The only safe time to remove a DFE-Gold module from the chassis is when the
CPU LED is alternately flashing amber/off. Otherwise, system operation will be
interrupted.
CPU LED is alternately flashing amber/off. Otherwise, system operation will be
interrupted.
Caution: This method of shutting down a DFE module is not recommended except as a
last resort, because all processes currently running on the module will be interrupted,
resulting in loss of frames.
Precaución: No se recomienda utilizar este método para apagar los módulos DFE.
Recurra a él sólo como último recurso, puesto que interrumpe todos los procesos del
módulo en funcionamiento, lo que podría resultar pérdidas de frames.
last resort, because all processes currently running on the module will be interrupted,
resulting in loss of frames.
Precaución: No se recomienda utilizar este método para apagar los módulos DFE.
Recurra a él sólo como último recurso, puesto que interrumpe todos los procesos del
módulo en funcionamiento, lo que podría resultar pérdidas de frames.