Fujitsu RX330 사용자 설명서
RX330 S1
Operating manual
59
Starting up and operation
Configuring the server
5.3.2
Configuration with ServerStart
With the
ServerStart
Disc 1 provided, you can configure the server and install the
operating system in a convenient manner. Menu-guided configuration includes
server configuration with the
server configuration with the
SCU
and RAID controller configuration with
ServerViewRAID
.
The ServerStart advantages
–
Automatic configuration of your server’s hardware and disk arrays.
–
Installation assistance for all leading server operating systems.
–
Creation of configuration files for unattended installation of several
PRIMERGY servers with identical hardware configurations.
PRIMERGY servers with identical hardware configurations.
–
Installation of drivers and additional software.
I
The software that can be installed depends on your server’s hardware
configuration. This configuration is detected automatically.
configuration. This configuration is detected automatically.
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver CDs.
manual are provided in the appropriate readme files on the driver CDs.
To find out how to operate
ServerStart
and for further information, refer to the
corresponding manual (see
If you are using
ServerStart
, you can skip the following section on how to
configure the server and install the operating system. Continue from the
section.