Fujitsu RX330 사용자 설명서
60
Operating manual
RX330 S1
Cleaning the server
Starting up and operation
5.3.3
Configuration without ServerStart
Configuring onboard SAS controller
Configure the controller as described in section
Operating system installation
Ê
Insert the CD for the operating system you want to install.
Ê
Reboot the server.
Ê
Follow the instructions on screen and in the manual for the operating
system.
system.
If your server is equipped with a RAID controller, please read how to install the
desired operating system in the related manual.
desired operating system in the related manual.
5.4
Cleaning the server
V
CAUTION!
Switch the server off and disconnect the power plugs from the grounded
shockproof sockets.
shockproof sockets.
Do not clean any interior parts yourself; leave this job to a service
technician.
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas
of the server and the monitor are clear.
of the server and the monitor are clear.
Clean the keyboard and the mouse with a disinfecting cloth.
Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a
cloth that has been moistened in a mild domestic detergent and then carefully
wrung out.
cloth that has been moistened in a mild domestic detergent and then carefully
wrung out.