ASKProxima impression 970 사용자 가이드
USER GUIDE
XGA LCD MULTIMEDIA PROJECTOR
32
SYMPTOM
SOLUTION
The whole
image appears
to be unstable
or misplaced
image appears
to be unstable
or misplaced
•
If the image is scaled, press SCALE to return to
the default mode.
•
Adjust the frequency and tuning settings
(instability), or the image position settings
(misalignment).
(misalignment).
•
Check that you are using a source with
compatible resolution.
•
The LCD projector may be connected to a source
with a non-standard computer (or video card).
Adjust the frequency and position of the image.
Adjust the frequency and position of the image.
Cooling fan is
not working
not working
•
Check that the Power ON/OFF switch is ON.
•
If the fan does not work the LCD projector must
not be used and should be returned to your
dealer for repair.
dealer for repair.
The remote
control is not
working
control is not
working
•
Make sure you point the remote control at the
projection screen or directly at the IR receiver
•
The maximum range of the IR transmitters is 15
m/ 49 feet - Are you standing close enough?
•
If the effective range of the transmitters is
significantly reduced, the remote control needs
new batteries.
new batteries.
The desktop
mouse is not
working
mouse is not
working
•
Remember that the mouse must be connected
before the computer source is switched on.
•
Are the mouse cable and mouse adapter
connections secure?
•
Check the mouse driver settings on the computer
source.
•
You must boot the computer after the cable has
been connected for it to recognise the mouse. If
you are unsure whether this was the case, reboot
your computer.
you are unsure whether this was the case, reboot
your computer.