TW Steel ce1005 사용자 가이드
ADJUSTINg THE TIME
ADJUSTINg THE DATE
ADJUSTINg THE DATE
USINg THE
CHRONOgRAPH
CHRONOgRAPH
changing the time
adjusting the date
Adjusting the time
Pull the crown out to
the 2nd click position so
that the second hand
stops at (0) position.
Turn the crown to set
the hour and minute
hands.
the 2nd click position so
that the second hand
stops at (0) position.
Turn the crown to set
the hour and minute
hands.
Adjusting the date
Pull the crown out to
the 1st position.
Turn the crown to the
left to set the date.
After the date has been
set, push the crown
back to the normal
position.
the 1st position.
Turn the crown to the
left to set the date.
After the date has been
set, push the crown
back to the normal
position.
Using the chronograph
The chronograph is able to measure and
display the time in 1/1 second united up to
an maximum of 1 hour. The chronograph
can be started and stopped each time
button A is pressed. Pressing button B
resets the chronograph. All hands return to
their (0) position. If the chronograph second
hand does not return to the (0) second po-
sition after the chronograph has been reset
or after replacing the battery, you should do
the following: Pull the crown out to the 2nd
position. Press button A to set the chro-
nograph second hand to the (0) position.
The chronograph hands can be advanced
display the time in 1/1 second united up to
an maximum of 1 hour. The chronograph
can be started and stopped each time
button A is pressed. Pressing button B
resets the chronograph. All hands return to
their (0) position. If the chronograph second
hand does not return to the (0) second po-
sition after the chronograph has been reset
or after replacing the battery, you should do
the following: Pull the crown out to the 2nd
position. Press button A to set the chro-
nograph second hand to the (0) position.
The chronograph hands can be advanced
rapidly by continuously pressing button A
or B. Once the chronograph second hand
has returned to the (0) position, return the
crown to its normal position.
or B. Once the chronograph second hand
has returned to the (0) position, return the
crown to its normal position.