TW Steel ce1005 사용자 가이드
USINg THE CHRONOgRAPH
OF THE TECH MODELS
OF THE TECH MODELS
TECH collection
To adjust the time and date
of the Tech, you first have to
unscrew the big crown anti
clockwise. You can now pull
out the crown to its 1st or
2nd position. Check the ma-
nual of the Canteen Style for
further instructions on how
to set the time and date.
of the Tech, you first have to
unscrew the big crown anti
clockwise. You can now pull
out the crown to its 1st or
2nd position. Check the ma-
nual of the Canteen Style for
further instructions on how
to set the time and date.
Use of the chrongraph
for all Tech models
for all Tech models
The chronograph is able to
measure and display the time
in 1/20 second united up to
a maximum of 59 min and
59 sec. The retrograde chro-
nograph 1/20 second hand
keeps running continuously
measure and display the time
in 1/20 second united up to
a maximum of 59 min and
59 sec. The retrograde chro-
nograph 1/20 second hand
keeps running continuously
for 30 seconds after starting
and then stops at (o) position.
Press button B to change the
watch to the chronograph
mode. The second hand
stops at the (0) position and
changes to the chronograph
1/20 second hand. The
chronograph can be started
and stopped each time button
A is pressed. Pressing button
B resets the chronograph.
All hands return to their (0)
position. If the chronograph
second hand and the chrono-
graph 1/20 second hand do
not return to the (0) second
position after the chronograph
has been reset or after repla-
cing the battery, you should do
and then stops at (o) position.
Press button B to change the
watch to the chronograph
mode. The second hand
stops at the (0) position and
changes to the chronograph
1/20 second hand. The
chronograph can be started
and stopped each time button
A is pressed. Pressing button
B resets the chronograph.
All hands return to their (0)
position. If the chronograph
second hand and the chrono-
graph 1/20 second hand do
not return to the (0) second
position after the chronograph
has been reset or after repla-
cing the battery, you should do
the following: Pull the crown
out to the 2nd position. Press
button A to set the chrono-
graph second hand to the (0)
position. Press button B to
set the chronograph 1/20
second hand to (0) position.
The chronograph hands can
be advanced rapidly by continu-
ously pressing button A or B.
Once the hands have returned
to the (0) position, return the
crown to its normal position
an screw the crown clockwise
back on to the case.
out to the 2nd position. Press
button A to set the chrono-
graph second hand to the (0)
position. Press button B to
set the chronograph 1/20
second hand to (0) position.
The chronograph hands can
be advanced rapidly by continu-
ously pressing button A or B.
Once the hands have returned
to the (0) position, return the
crown to its normal position
an screw the crown clockwise
back on to the case.
CAUTION: IF THE CROWN IS NOT
PRESSED IN PROPERLY, THE
WATCH IS NO LONGER WATER-
PROOF AND THE MOVEMENT
CAN BE SERIOUSLY DAMAGED!
PRESSED IN PROPERLY, THE
WATCH IS NO LONGER WATER-
PROOF AND THE MOVEMENT
CAN BE SERIOUSLY DAMAGED!