3com 8807 참조 가이드
PoE Configuration Commands
881
the display poe interface power command without any argument, the PoE
power information about all PoE-capable ports on the switch will be displayed.
power information about all PoE-capable ports on the switch will be displayed.
Example
# Display the power information of the port GigabitEthernet3/1/1.
<SW8800> display poe interface power GigabitEthernet3/1/1
Port power :700 mW
display poe pse
Syntax
display poe pse
View
Any view
Parameter
None
Description
Use the display poe pse command to display the parameters of all the PoE cards
in the switch that serve as a power sourcing equipment (PSE).
in the switch that serve as a power sourcing equipment (PSE).
Example
# Display the parameters of all the PoE cards in the switch.
<SW8800> display poe pse
PSE Information of slot 6:
Power Current Value :67 W
Power Remaining Value :738 W
Power Max Value :806 W
Power Peak Value :1 W
Power Average Value :0 W
Software Version :290
Hardware Version :000
CPLD Version :021
n
The sampling cycle of the current power of the interface card is 1 minute, and the
sampling cycle of the peak power and average power is 5 minutes.
sampling cycle of the peak power and average power is 5 minutes.
display poe slot
Syntax
display poe slot slotnum
Table 119 Description on the fields of the display poe pse command
Field
Description
Power Current Value
Current power of the card
Power Remaining Value Remaining power of the card
Power Max Value
Maximum power of the card
Power Peak Value
Peak power of the card
Power Average Value
Average power of the card
Software Version
PSE software version
Hardware Version
PSE hardware version