3com 8807 참조 가이드

undo poe enable slot slot-num

System view

slot-num: Number of the slot where the module resides.

Use the poe enable slot command to enable PoE on a module.

Use the undo poe enable slot command to disable PoE on a module.

By default, PoE is disabled on a module.

The switch checks that the total power of the current system is sufficient before 
allowing you to enable PoE on the module by using this command.

# Enable PoE on the module in slot 2.

[SW8800]poe enable slot 2 

# Disable PoE on the module in slot 2.

[SW8800]undo poe enable slot 2 

poe legacy enable slot slot-num

undo poe legacy enable slot slot-num

System view

slot-num: Number of the slot where the module resides.

Use the poe legacy enable slot command to enable the module to detect the 
compatibility of the PD connected to it.

Use the undo poe legacy enable slot command so that the module does not 
detect the compatibility of the PD connected to it.

When detecting the compatibility of PDs, the module can detect and power the 
PDs incompatible with the 802.3af standard.

By default, the module does not detect the compatibility of the PD connected to it.

c