TP-LINK TL-WR2543ND 사용자 설명서

 

- 34 - 

¾

 

MAC Address - The physical address of the Router, as seen from the LAN. The value can't 

be changed. 

¾

 

IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation 

(factory default: 192.168.0.1). 

¾

 

Subnet Mask - An address code that determines the size of the network. Normally use 

255.255.255.0 as the subnet mask.   

)

 

1)  If you change the IP Address of LAN, you must use the new IP Address to log in the Router.   

2)  If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP 

server will change accordingly at the same time，while the Virtual Server and DMZ Host will 

not take effect until they are re-configured. 

 

Figure 4-15  Wireless menu 

There are five submenus under the Wireless menu (shown in Figure 4-15): Wireless Settings, 

Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click 

any of them, and you will be able to configure the corresponding function.   

Choose menu “Wireless  → Wireless Settings”, you can configure the basic settings for the 
wireless network on this page.