honda-automobiles mm60 사용자 설명서

1. Review and follow safety rules on pages 4-7. 

2. 

Do 

not operate mower unless belt shield and 

discharge chute are in place and securely 

fastened. 

3. 

Check that mower is properly and securely 

attached to tractor. 

4.

 Check to ensure blades are sharp, secure and 

properly installed. See Blade Condition on 
Page 

5. Check that all hardware is properly installed 

and secured. 

6. Check to ensure spindles and caster wheels 

are lubricated 

. 

7. When attaching U-joint to tractor 

mid-P

TO 

shaft, it is important that the spring-activated 
locking collar slides freely and the balls are 
seated in groove on mid-PTO shaft. 

8. Check mower cutting height and attitude 

adjustment. See Adjusting Cutting Height on 

Power 

 for operating mower is supplied by tractor 

mid-PTO. Do not exceed tractor manufacturer's 
rated mid-PTO speed of 2400 RPM (maximum 
governed engine RPM). Know how to stop tractor 
and mower quickly in case of an emergency. 

Should mower become plugged, causing belt to 
slip for over 

two seconds, maneuver equipment 

into a previously cut area and allow mower to clear 

accumulated material. Continue running at least 
two minutes, allowing pulleys to cool. Stopping the 
mower with belt in contact with a very hot pulley 

will bake and ruin belt. 

9. 

Raise mower carefully and check to be sure it 

does not come in contact with hydraulic lines. 

10.

  Remove grass and other foreign material from 

the top of the deck.