TANDBERG media2 blade mse 8510 사용자 설명서

Using the Media2 blade

9

To create a conference:
1

In the web interface of the Media2 blade, go to 

 and click 

.

2

Type  a 

 for the conference, for example SalesMeeting.

3

Type an optional numeric identifier, for example 

. This will be the 

telephone number that participants can use to join the conference when calling 
in to the Media2 blade via a gatekeeper or SIP registrar.

4

If you are using a gatekeeper, check 

; if you are using a SIP 

registrar, check 

.

5

Ensure the 

 of the conference is sufficient (the default is one 

hour).

6

All other values can be left at their default settings. Refer to the online help for 
further information about the available settings.

7

Scroll down and click 

.

The conference you have created is now active (if you used the default immediate 
start time) and participants can join in one of two ways: either the Media2 blade can 
call out to specified endpoints or endpoints can dial in. Any endpoints that have been 
added to a conference, as pre-configured participants, will be called in to the 
conference by the Media2 blade.

There are two types of conference participant: chairperson and guest. 
IDs and PINs allow participants to connect to conferences as the correct 
participant type. Chairperson participants use the Numeric ID and 
optionally, the PIN; guest participants use the Guest numeric ID and 
optionally, the Guest PIN. For more information, refer to the online help.

Note that if you do not configure the conference to start immediately, it 
will become a scheduled conference and will be inactive until its start 
time.