TANDBERG media2 blade mse 8510 사용자 설명서

Configuring the Media2 blade

7

All administration of the Media2 blade is performed via the web interface.
To log in to the web interface of the Media2 blade:
1

Log in to the Supervisor’s web interface.

2

Go  to 

 and click the IP address of the Media2 blade.

3

Click 

, and then click

 and enter the user name 

 with 

no password. 

Port licenses must be assigned to the Media2 blade from the Supervisor's 

 page: where the MSE 8510 Media2 blade is supporting high definition 

conferencing, each port requires more than one port license. Use the online help for 
assistance. 

If you have H.323 endpoints, using an H.323 gatekeeper can make it easier for 
participants to call in to a conference. You can configure the Media2 blade to use an 
external gatekeeper or its own built-in gatekeeper. For information about using the 
built-in gatekeeper, refer to the online help.
If you have SIP endpoints, using a SIP registrar can make it easier for participants to 
call in to a conference.
To configure the Media2 blade to use an H.323 gatekeeper:
1

In the web interface of the Media2 blade, go to 

.

2

Enable 

 and configure the settings you require, using 

the online help for further assistance.

3

Click 

.

Codian recommends that you change the admin account to use a 
password as soon as possible. To do that, go to 

, click the 

 

link, and provide the required user information.