honda-automobiles hrx217hxa 사용자 설명서

4

Your safety is your responsibility. A little time spent in preparation will 
significantly reduce your risk of injury.

Read and understand this manual. Know what the controls do and 
how to operate them.

Familiarize yourself with the lawn mower and its operation before you 
begin using it. Know how to shut off the lawn mower quickly in case of 
an emergency.

For your safety, and to maximize the service life of your lawn mower, 
it is very important to take a few moments before you operate the lawn 
mower to check its condition. Be sure to take care of any problem you 
find or have your servicing dealer correct it before you operate the 
lawn mower.

Before beginning your pre-operation checks, be sure the lawn mower 
is on a level surface.

• Look around and underneath the lawn mower for signs of oil or 

gasoline leaks.

• Look for signs of damage.

• Check each control for proper operation.

• Check the blades for wear. Replace as necessary (page 10).

• Check that the blade bolts are tight (page 10).

• Check that all nuts, bolts, and screws are tightened.

• Check the air cleaner (page 12) and oil level (page 11).

• Check the fuel level (page 12). Starting with a full tank will help 

eliminate or reduce operating interruptions for refueling.

For your safety and the safety of others, always inspect the area 
before operating the lawn mower.

Anything that can be picked up by the blades and thrown is a potential 
hazard to you and others. Look for things like stones, sticks, nails, and 
wire, and remove them from the work area.

People and animals near the work area can move into your lawn 
mower’s path or into a position where they could be struck by thrown 
objects. Clear the area of pets and people, especially children. Their 
safety is your responsibility.

Check the condition of the grass. Adjust your lawn mower ground 
speed and mowing swath accordingly.



Improperly maintaining this lawn mower or failing to correct a 
problem before operation could cause a malfunction in which 
you could be seriously injured.

Always perform a pre-operation inspection before each 
operation and correct any problem.