honda-automobiles fs5047 사용자 설명서
OPERATION (continued)
OPERATING
THE ROTARY BROOM APPLICATIONS:
•
SNOW REMOVAL
1
. Read the operator's manual carefully.
Be thoroughly familiar with the
controls and proper use of the
equipment.
may be thrown farther than the snow. Use
slowest brush speed that will perform
the job. Stay aware of broom discharge
the job. Stay aware of broom discharge
direction.
2.
Do not allow anyone other than the
operator on the tractor.
Do not allow
any rider on the attachment.
3. If tractor is not equipped with
optional cab, operator must wear
eye protection (face shield etc.)
during operation.
4.
Be sure bystanders are completely
clear of tractor, broom and broom
discharge area before operating the
broom. Contact with tractor, broom
or debris discharged by broom can
cause serious i n
cause serious i n
jury.
Remove
any accumulation of
snow, ice, dirt
or mud from
broom
hood
and from in between
bristles regularly; excess
weight
weight
will unbalance broom
causing premature wear of
bristles .
bristles .
IMPORTANT:
For efficient operation, sweep
with
the tips of the bristles like a
broom; not
with the sides of
the bristles
like
a mop.
1.
This broom works best on snow depth
of
6" or
less, large amount of snow
can be moved if ground speed is
reduced.
2. To avoid snow being blown back on the
tractor and/or operator, sweep with
the
the
wind blowing in the direction
of
broom discharge.
3.
The use of HONDA approved
rear
counterweight
is recommended.
LAWN
THATCHING AND
LEAF RAKING
: Optional caster
must
be installed to perform these types of
operation in order to avoid excessive
ground contact.
operation in order to avoid excessive
ground contact.
t o 1
below
brush tips for leaf raking
and thatching operation.
2.
Slower brush
speed and ground speed
are more adequate for lawn thatching.
Th i s w i l l a v o i d b o u n c i n g w h i c h
Th i s w i l l a v o i d b o u n c i n g w h i c h
could damage the lawn due to excessive
ground contact.
ground contact.
3. Minimize dust by sweeping when moisture
is high (not wet) whenever possible.
•
GENERAL SWEEPING (parking lot etc.)
1.
Minimize dust by reducing brush speed
and by sweeping on days with high
moisture.
moisture.
2.
For light
material, angle broom 12.5
o
right or left rather than fully angled
to obtain a
to obtain a
wider sweeping path.
3. Prevent damage to broom by removing
large foreign objects.
OM
0180
10
Optional caster wheels must
1. Set caster wheels at 1" to 1 1/4"