Microboards Technology hcl-6000 사용자 설명서

 

Processing... 
Please Wait 

Loader Processing 
Drive 1 <- Input Bin 

Input Bin Empty (20) 
Press OK to Continue 

Loading...  RESERVED 
36%     121MB Loaded 

Loader Processing 
Drive 1 -> Output Bin 

Master #1,  Total 20 
Pass 20, Fail 0 

Master #2,  Total 40 
Pass 40, Fail 0 

Master #3,  Total 30 
Pass 30, Fail 0 

Access Log File 
OK? 

The loader will continue to remove discs from the Input Spindle and place those into drives until either all of 
the drives are full or all Input Spindles are empty. 

 
It takes a few seconds for the autoloader to recognize all of the discs in the 
trays.  
 
 
Once all of the discs are detected, the autoloader will detect the master disc 
and read the contents of the master disc into the reserve partition. 
 
Once the master disc has been loaded, the autoloader will remove the 
master disc from the drive and place it onto the Output Spindle. 
 
 
The loader will then pick up another blank disc and load it into the drive 
where the last master disc was placed. 
 

 
Once the loading process is completed, the duplication process will start. When the duplication process is 
through, the loader will remove the discs from the drives and place successful copies onto the Output 
Spindles and place failed copies into the Reject Area. 
 
In Multi Master Mode, the robotic arm continues to load more media into the drives from Input Spindles while 
the duplicated discs are placed in the Output Spindle. Once a new Master disc are been detected by any of 
the drives, this process will repeat for the new Master disc. 
 
When all of the jobs are complete, and the autoloader detects all Input Spindles are empty, it presents you 
with the Input Bin Empty message:  

 
Press the    OK button to continue and you will see the Access Log File 
screen:  
 

 

Press the    OK button to view the log file or press the    ESC  button to 
return to the 1.Copy menu. If you choose to see the log file, you will see a 
screen similar to below: 

 

 
 
 
Use the   Up or   Down buttons to look at the log file for the various jobs. 
Press the   ESC button to return to the 1.Copy menu  
 
 
 
 

Use the Test menu or Test quick key to simulate the copy process. With simulation, write once recordable 
discs such as DVD-R, or CDR will be reusable. The purpose of simulation is to ensure error free duplication.  

Operation in Test mode is identical to operation in Copy mode. See Copy on page 14 for instructions.