Panasonic KX-FPG391 작동 가이드
10. Help
92
For Fax Advantage assistance, call 1-800-435-7329.
10 Help
10For Fax Advantage assistance, call 1-800-435-7329.
Error Messages
10.1 Error messages –
Reports
Reports
If a problem occurs during fax transmission or
reception, one of the following messages will be
printed on the sending and journal reports (page
54).
reception, one of the following messages will be
printed on the sending and journal reports (page
54).
COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)
(Code: 40-42, 46-72, FF)
L
A transmission or reception error occurred.
Try again or check with the other party.
Try again or check with the other party.
COMMUNICATION ERROR
(Code: 43, 44)
(Code: 43, 44)
L
A line problem occurred. Connect the
telephone line cord to a different jack and try
again.
telephone line cord to a different jack and try
again.
L
DOCUMENT JAMMED
L
The document is jammed. Remove the
jammed document (page 105).
jammed document (page 105).
ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)
(Code: 54, 59, 70)
L
A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.
because of a problem with the other party’s
fax machine. Check with the other party.
JUNK FAX PROH. REJECT
L
The junk fax prohibitor feature of this unit
rejected fax reception.
rejected fax reception.
MEMORY FULL
L
The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 17)
or clear the jammed paper (page 102).
due to a lack of recording paper or a
recording paper jam. Install paper (page 17)
or clear the jammed paper (page 102).
NO DOCUMENT
L
The document was not fed into the unit
properly. Re-insert the document and try
again.
properly. Re-insert the document and try
again.
OTHER FAX NOT RESPONDING
L
The other party’s fax machine is busy or has
run out of recording paper. Try again.
run out of recording paper. Try again.
L
The other party’s fax machine rang too many
times. Send the fax manually (page 53).
times. Send the fax manually (page 53).
L
The other party’s machine is not a fax
machine. Check with the other party.
machine. Check with the other party.
L
The number you dialed is not in service.
PRESSED THE STOP KEY
L {
STOP} was pressed, and fax transmission
or reception was canceled.
OK
L
Fax transmission or reception was
successful.
successful.
10.2 Error messages –
Display
Display
If the unit detects a problem, one or more of the
following messages will appear on the display.
following messages will appear on the display.
10.2.1 Base unit
—————————————————————
ALL MAILBOX FULL
L
There is no room left in memory to record
voice messages, or the number of recorded
messages has reached 64. Erase
unnecessary messages (page 68, 70).
voice messages, or the number of recorded
messages has reached 64. Erase
unnecessary messages (page 68, 70).
—————————————————————
BUSY
L
The called handset is in use.
L
The handset you tried to copy phone book
items to is in use.
items to is in use.
L
The handset you are calling is too far from the
base unit.
base unit.
L
Privacy mode is turned ON for the call you
tried to join (page 51).
tried to join (page 51).
—————————————————————
CALL SERVICE
L
There is something wrong with the unit.
Contact our service personnel.
Contact our service personnel.
—————————————————————
CHECK DOCUMENT
L
The document was not fed into the unit
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 105) and try
again.
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 105) and try
again.
L
Attempted to send a document longer than
600 mm (23
600 mm (23
5
/
8
"). Press {STOP} to remove
the document. Divide the document into two
or more sheets, and try again.
or more sheets, and try again.
—————————————————————
CHECK MEMORY
L
The base unit memory (telephone numbers,
parameters, etc.) has been erased. Re-
program.
parameters, etc.) has been erased. Re-
program.
FPG391-PFQX2058YA_en.book Page 92 Thursday, December 21, 2006 10:04 AM