Panasonic KX-FPG391 작동 가이드
9. Option
90
9 Option
Handset Registration
9.1 Canceling the handset
registration
registration
If you no longer need to use the handset or if you
want to use the handset with a different base unit
of the same model, it is necessary to cancel the
handset’s registration from the current base unit.
Only one handset can be canceled at a time.
Make sure the handset and the base unit are
near each other and not being used.
want to use the handset with a different base unit
of the same model, it is necessary to cancel the
handset’s registration from the current base unit.
Only one handset can be canceled at a time.
Make sure the handset and the base unit are
near each other and not being used.
L
Keep the front cover page open for button
locations.
locations.
9.1.1 With the handset
1
Press {MENU}.
2
Scroll to “
Initial setting” by pressing
{v}
or {e}, then press the soft key
({SELECT}).
3
Scroll to “
Registration” by pressing {v}
or {e}, then press the soft key ({SELECT}).
4
Scroll to “
Deregistration” by pressing
{v}
or {e}, then press the soft key
({SELECT}).
5
Press {3}{3}{5} (DEL.) to delete the
registration memory.
registration memory.
6
Press the soft key ({OK}).
L
A beep will sound and the registration
memory will be erased on both the
handset and the base unit.
memory will be erased on both the
handset and the base unit.
L
“
[-]” is shown on the top right of the
canceled handset’s display.
9.1.2 With the base unit
1
Press and hold {LOCATOR/INTERCOM}
until “
until “
HS REGISTRATION” is displayed.
2
Press the desired extension number you
want to cancel ({1} to {4}).
want to cancel ({1} to {4}).
3
Press {SET}.
L
A beep will sound and the registration
memory will be erased on the base unit
only.
memory will be erased on the base unit
only.
Note:
L
After canceling registration, the handset
cannot be used. If you want to use it again,
re-register the handset to the base unit.
cannot be used. If you want to use it again,
re-register the handset to the base unit.
9.2 Re-registering the
handset
handset
If you want to re-register the handset to the base
unit or a different base unit of the same model,
you need to register it to that base unit. The
handset will be given a new extension number of
that base unit. Only one handset can be
registered at a time.
Make sure the base unit and the other
handsets are near each other and not being
used. Registration must be completed within
1 minute.
unit or a different base unit of the same model,
you need to register it to that base unit. The
handset will be given a new extension number of
that base unit. Only one handset can be
registered at a time.
Make sure the base unit and the other
handsets are near each other and not being
used. Registration must be completed within
1 minute.
L
If you have canceled the handset registration
at the previous base unit (page 90), start from
step 5.
at the previous base unit (page 90), start from
step 5.
L
Keep the front cover page open for button
locations.
locations.
1
Handset:
Press {MENU}.
2
Scroll to “
Initial setting” by pressing
{v}
or {e}, then press the soft key
({SELECT}).
3
Scroll to “
Registration” by pressing {v}
or {e}, then press the soft key ({SELECT}).
4
Press the soft key ({SELECT}) at “
HS
registration”.
5
Base unit:
Press and hold {LOCATOR/INTERCOM}
until “
until “
HS REGISTRATION” is displayed.
6
Handset:
1. Press the soft key ({OK}).
2. Wait until a long beep sounds and the
display shows the registered number.
The registration will be complete.
The registration will be complete.
L
The registered number “
[1]” to
“
[4]” will be shown on the top right of
the display.
Example: Extension number 2
Note:
L
To stop registration, press {OFF} on the
handset and press {LOCATOR/INTERCOM}
on the base unit.
handset and press {LOCATOR/INTERCOM}
on the base unit.
[2]
Handset [2]
Registered
Registered
FPG391-PFQX2058YA_en.book Page 90 Thursday, December 21, 2006 10:04 AM