Panasonic KX-MC6040 작동 가이드
5. Copier
37
5 Copier
Copy
5.1 Making a copy
5.1.1 Using the scanner glass
1
If the {Copy} light is OFF, turn it ON by pressing
{
{
Copy}.
2
Set the original (page 20).
3
If necessary, change the copy settings according to
the type of document.
the type of document.
L
To change the number of copies, see page 37.
L
To select the contrast, see page 37.
L
To select the resolution, see page 37.
L
To select the zoom rate, see page 37.
4
{
Black}/{Color}
L
The unit will start copying.
5
After you finish copying, press {Stop} to reset the
settings you set in step 3.
settings you set in step 3.
Note:
L
To stop copying, see page 75.
L
You can change the default operation mode (feature
#463 on page 59) and the timer before returning to
the default operation mode (feature #464 on page
59).
#463 on page 59) and the timer before returning to
the default operation mode (feature #464 on page
59).
L
If the {Fax Auto Answer} light is ON, the unit can
receive faxes automatically even when in the copy
mode.
receive faxes automatically even when in the copy
mode.
To change the number of copies
1. Press {V} or {^} repeatedly to select “
Copies”.
2. Enter the number of copies (up to 99).
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press {V} or {^} repeatedly to select “
Contrast”.
2. Press {<} or {>}. i {Set}
Note:
L
You can hold the previous contrast setting (feature
#462 on page 59).
#462 on page 59).
To select the resolution
1. Press {V} or {^} repeatedly to select
“
Resolution”.
2. Press {<} or {>} repeatedly to select the desired
resolution.
–
–
“
Text/Photo”: For both text and photographs.
–
“
Text”: For text only.
–
“
Photo”: For photographs, shaded drawings,
etc.
3. {Set}
Note:
L
You can change the default resolution (feature #461
on page 64).
on page 64).
To select zoom rate (enlargement / reduction)
1. Press {V} or {^} repeatedly to select “
Zoom”.
2. Press {<} or {>} repeatedly to select the zoom rate
that fits the size of your document and recording
paper.
–
paper.
–
“
100%”
–
“
50%”
–
“
200%”
–
“
Letter
→A4”
–
“
A4
→Letter”
–
“
Legal
→A4”
–
“
Legal
→Letter”
*1 Make sure A4-size recording paper is installed.
*2 Make sure letter-size recording paper is installed.
*2 Make sure letter-size recording paper is installed.
L
You can enter the desired percentage from
“
“
25%” to “400%” specifically by using the dial
keys.
3. {Set}
Note:
L
Zoom copy is not available for the following features:
–
–
Quick ID copy feature (page 39)
–
Easy repeat feature (page 39)
–
Poster feature (page 40)
–
N in 1 feature (page 40)
–
Separate N in 1 feature (page 40)
–
Booklet feature (page 41)
L
You can hold the previous zoom setting (feature #468
on page 64).
on page 64).
L
When using the scanner glass, the unit will only
enlarge the right top corner of the document starting
from the m mark on the unit.
enlarge the right top corner of the document starting
from the m mark on the unit.
L
When using the automatic document feeder, the
unit will only enlarge the center of the upper part of
the document. To make an enlarged copy of the
bottom of the document, turn the document around,
and then make a copy.
unit will only enlarge the center of the upper part of
the document. To make an enlarged copy of the
bottom of the document, turn the document around,
and then make a copy.
{
Color}
{
Set}{V}{^}{<}{>}
{
Copy}
{
Black}
{
Fax Auto Answer}
{
Stop}