Xircom EAG2919 사용자 설명서
Eagle II GSM Radio Module Technical Manual Preliminary Draft: 08/31/00
30
Part Number: 07100017 version 00.04
© 2000 Xircom, Inc. All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc.
All trademarks and copyrights are the property of Xircom, Inc.
!
The following command queries the strength of the RF coverage. This command
provides information about the RF coverage for the Eagle II module.
provides information about the RF coverage for the Eagle II module.
App > Eagle
AT+CSQ
Get the signal strength (for this command, do not
enter “?”)
enter “?”)
Eagle > App
+CSQ: 10,99
OK
Receive signal strength = 10, -95 dBm
RXQUAL =99, unknown
!
The following command requests the current Public Land Mobile Network (PLMN).
App > Eagle
AT+COPS?
Request current PLMN
Eagle > App
+COPS: 0,2,31026
OK
Home PLMN is VoiceStream
Initialize the EAGLE II Module to Send SMS Text
To be able to send SMS text messages, the Eagle II module must be initialized with the
proper SMS mode. The following examples provide the AT commands and responses for
initializing the SMS mode.
proper SMS mode. The following examples provide the AT commands and responses for
initializing the SMS mode.
!
The following command initializes the Eagle II module by setting the text mode
parameters.
parameters.
App > Eagle
AT+CSMP=17,167,0,0
Set text mode parameters:
"
17: Sets reply pat, user data header,
status report request, validity period
format, reject duplicates and
message type
status report request, validity period
format, reject duplicates and
message type
"
167: Sets validity period
"
0: Higher layer protocol indicator
"
0: Information encode format
Eagle > App
OK
Command is correct