TP-LINK TD-W8920G 사용자 설명서

The form of MAC Address must be “xx:xx:xx:xx:xx:xx”, like “00:13:0A:55:FF:09”. 

 

Figure 5-60 

When you finished making changes to the MAC Filter List screen, click the Save/Apply button to 

save the changes. 

Choose “Wireless”

Æ”Advanced”, you will see the screen of Wireless-Advanced settings shown 

as below. 

 

Figure 5-61 

¾  Channel: Select the channel you want to use from the drop-down List of Channel. This field 

determines which operating frequency will be used. It is not necessary to change the 

wireless channel unless you notice interference problems with another nearby access point. 

¾  Fragmentation Threshold: This value specifies the maximum size for a packet before data 

is fragmented into multiple packets. If you experience a high packet error rate, you may 

slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low 

may result in poor network performance. Only minor reduction of the default value is 

recommended. In most cases, it should remain at its default value of 2346. 

¾  RTS Threshold: Should you encounter inconsistent data flow, only minor reduction of the 

 67