Westinghouse CSA (Canada) WHC6000S CSA MODEL 사용자 매뉴얼

 

27

–

–

–

–

Check/Adjust

–

–

–

Check/Clean

–

–

–

–

–

Check/Adjust

1.  Only use the engine oil specified in Figure 23.

2.  Only use 4-stroke/cycle engine oil. NEVER USE 

2-STROKE/CYCLE OIL.

Always maintain proper engine oil level. Failure to 
maintain proper engine oil level could result in severe 
damage to the engine and/or shorten the life of the 
engine.

Always use the specified engine oil. Failure to use the 
specified engine oil can cause accelerated wear  
and/or shorten the life of the engine.

Engine oil level should be checked before every use.

1.  Always operate or maintain the generator on a flat 

surface.

2.  Stop engine if running.

3.  Let engine sit and cool for several minutes (allow 

crankcase pressure to equalize).

4.  With a damp rag, clean around the oil fill plug/

dipstick.

5.  Remove oil fill plug/dipstick (see Figure 24).

6.  Check oil level:

When checking the engine oil, remove the oil fill 
plug/dipstick and wipe it clean. Thread the oil fill 
plug/dipstick all the way back in and then remove 
and check the oil level on the oil fill plug/dipstick.
x Acceptable Oil Level – Oil is visible on the cross-

hatches between the H and L lines on the oil fill 
plug/dipstick (see Figure 25).

x Low Oil – Oil is below the L line on the oil fill plug/

dipstick.

H

L