Westinghouse CSA (Canada) WHC6000S CSA MODEL 사용자 매뉴얼

30 

9.  Dry the air filter elements by again applying a slow 

firm squeezing action.

10.  Once the air filters are dry, coat the air filters with 

clean engine oil (see Figure 31).

11.  Squeeze the filters to remove any excess oil (see 

12.  Install the gray fine inside air filter into the air filter 

housing first.

13.  Install the black coarse outside air filter on top of 

the fine filter.

14.  Install the air filter cover by clipping the clips on the 

top and bottom of the air filter assembly (see Figure 
33).

The spark plug must be checked and cleaned after 
every 100 hours of use or 6 months and must be 
replaced after 300 hours of use or every year.

1.  Stop the generator and let it cool for several 

minutes if running.

2.  Move the generator to a flat, level surface.

3.  Remove the spark plug boot by firmly pulling the 

plastic spark plug boot handle directly away from 
the engine (see Figure 34).

Never apply any side load or move the spark plug 
laterally when removing the spark plug. Applying a 
side load or moving the spark plug laterally may crack 
and damage the spark plug boot.