Netopia R310 사용자 설명서

MultiNat suppor ts the following IP protocols:

■

PAT: TCP/UDP traffic which does not carr y source or destination IP addresses or por ts in the data stream 
(i.e., HTTP, telnet, ‘r’ commands, tftp, NFS, NTP, SMTP, NNTP, etc.).

■

Static NAT: All IP protocol traffic which does not carr y or other wise rely on the source or destination IP 
addresses in the data stream.

■

Dynamic NAT: All IP protocol traffic which does not carr y or other wise rely on the source or destination IP 
addresses in the data stream.

You configure the MultiNAT features through the console menu:

■

For a simple 1-to-many NAT configuration (classic NAT), use the 

, 

described below.

■

For the more advanced features, such as Ser ver Lists and Dynamic NAT, follow the instructions in 

The screen below is an example. Depending on the type of router you are using, fields displayed in this screen 
may var y.

The Local WAN IP Address is used to configure a NAT public address range consisting of the Local WAN IP 
Address and all its por ts. The public address map list is named Easy-PAT List and the por t map list is named 
Easy-Ser vers.

                   Connection Profile 1: Easy Setup Profile

         Number to Dial:                    2125551212

         Address Translation Enabled:       Yes
         IP Addressing...                   Unnumbered

         Local WAN IP Address:              206.1.1.6
         Local WAN IP Mask:                 0.0.0.0
         Remote IP Address:                 127.0.0.2
         Remote IP Mask:                    255.255.255.255

         PPP Authentication...              PAP
         Send User Name:                    tony
         Send Password:                     *****

         PREVIOUS SCREEN                    NEXT SCREEN

Enter the directory number for the remote network connection.
Enter basic information about your WAN connection with this screen.