FMC Corporation - Talstar 80 사용자 설명서

Proline Promass 80 PROFIBUS PA

Commissioning

51

The function scope of the profile GSD file is defined by the PROFIBUS Profile Specification 3.0. The 
function scope is restricted compared to the manufacturer-specific GSD file (complete device 
functionality). However, similar devices from different manufacturers can be interchanged with the 
profile GSD file without the need to reconfigure (interchangeability).

Profile GSD (multivariable) with the ID number 9760 (Hex): This GSD contains all the function 
blocks such as AI, DO, DI etc. This GSD is not supported by Promass.

!

Note! 
• Before configuration takes place, a decision should be made as to which GSD should be used to 

operate the system.

• The setting can be changed via the local display or using a Class 2 master. Setting via the local 

display. Page 48

GSD files supported: 

Each device receives an identification number (ID No.) from the Profibus User Organization (PNO). 
The name of the device master file (GSD) is derived from this.
For Endress+Hauser, this ID No. starts with the manufacturer ID 15xx.
In order to ensure clarity and make assignment easier, the GSD names (with the exception of type 
files) at Endress+Hauser are as follows:

Name of the PROFIBUS Profile GSD file

Source

Internet (GSD library of the PROFIBUS User Organization) 

→ www.PROFIBUS.com

EH3_15xx

EH = Endress + Hauser
3 = Profile 3.0
_ = Standard ID
15xx = ID No.

EH3x15xx

EH = Endress + Hauser
3 = Profile 3.0
x = Extended ID
15xx = ID No.

9742 (Hex)

PA139742.gsd