Alpine CDA-105RI 사용자 설명서
17
-EN
Turning Subwoofer ON/OFF
When the subwoofer is on, you can adjust the subwoofer output level
(refer to page 15).
(refer to page 15).
1
Press and hold SOUND SETUP for at least 2
seconds to activate the Subwoofer selection mode.
seconds to activate the Subwoofer selection mode.
2
Turn the Rotary encoder to select the
SUBWOOFER mode, and then press
SUBWOOFER mode, and then press
/ENT.
SUBWOOFER
SUBW SYSTEM*
13
SUBWOOFER
3
Turn the Rotary encoder to select SUBW ON/OFF
and then press
and then press
/ENT.
SUBW ON (Initial setting)
SUBW OFF
4
Press and hold
/ESC for at least 2 seconds to
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
*
13
Displayed only when SUBWOOFER is set to ON.
Setting the Subwoofer System
When the subwoofer is on, you can select either SYS 1 or SYS 2 for the
desired subwoofer effect.
desired subwoofer effect.
1
Press and hold SOUND SETUP for at least 2
seconds to activate the Subwoofer selection mode.
seconds to activate the Subwoofer selection mode.
2
Turn the Rotary encoder to select the SUBW
SYSTEM mode, and then press
SYSTEM mode, and then press
/ENT.
SUBWOOFER
SUBW SYSTEM
SUBWOOFER
3
Turn the Rotary encoder to select SUBW SYS 1 or
SUBW SYS 2, and then press
SUBW SYS 2, and then press
/ENT.
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
SUBW SYS 1 (Initial setting)
SUBW SYS 2
4
Press and hold
/ESC for at least 2 seconds to
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• This function is inoperable when SUBWOOFER is set to OFF.
Turning Loudness On/Off
Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
Press and hold Rotary encoder (LOUD) for at least 2
seconds to activate or deactivate the loudness mode.
seconds to activate or deactivate the loudness mode.
• The function is inoperable when DEFEAT is set to ON.
• When an external audio processor is connected, this setting cannot
• When an external audio processor is connected, this setting cannot
be made.
SUBW SYS 1:
Subwoofer level changes according to the
main volume setting.
main volume setting.
SUBW SYS 2:
Subwoofer level change is different from the
main volume setting. For example, even at low
volume settings, the subwoofer is still audible.
main volume setting. For example, even at low
volume settings, the subwoofer is still audible.