Alpine CDA-105RI 사용자 설명서
19
-EN
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc. can be modified.
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc. can be modified.
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP mode.
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired
SETUP menu, and then press
SETUP menu, and then press
/ENT.
(e.g. Select POWER IC)
BLUETOOTH IN*
1
FM-LEVEL
RDS REGIONAL*
2
PI SEEK*
3
ALERT PTY31*
4
ILLUMINATION
LCD CONTRAST
PLAY MODE
SCROLL TYPE
TEXT SCROLL
INT MUTE*
5
AUX+ SETUP
AUX+ NAME*
6
AUX IN GAIN*
6
DIGITAL AUX
D-AUX NAME*
7
AUX IN
AUX NAME*
8
POWER IC
LANGUAGE
STEERING
DEMO
BLUETOOTH IN
*
1
Displayed only when INT MUTE is OFF, and the mode is set to other
than BT AUDIO.
than BT AUDIO.
*
2
*
3
Refer to “PI SEEK Setting” (page 10).
*
4
*
5
Displayed only when BLUETOOTH IN is OFF.
*
6
Displayed only when AUX+ SETUP is ON.
*
7
Displayed only when DIGITAL AUX is ON.
*
8
Displayed only when AUX IN is ON.
3
Turn the Rotary encoder to change the setting.
(e.g. Select POWER IC ON or POWER IC OFF.)
4
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
return to normal mode.
• Press
/ESC to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the Bluetooth Connection
If an optional Bluetooth INTERFACE (KCE-400BT) is connected, you
can place a hands-free call by a Bluetooth-equipped mobile phone.
Make this setting when the Bluetooth INTERFACE (KCE-400BT) is
connected and the Bluetooth function is used. For details, refer to the
Owner’s Manual of the optional Bluetooth INTERFACE (KCE-400BT).
Set ADAPTE when the Bluetooth INTERFACE (KCE-400BT) is
connected.
can place a hands-free call by a Bluetooth-equipped mobile phone.
Make this setting when the Bluetooth INTERFACE (KCE-400BT) is
connected and the Bluetooth function is used. For details, refer to the
Owner’s Manual of the optional Bluetooth INTERFACE (KCE-400BT).
Set ADAPTE when the Bluetooth INTERFACE (KCE-400BT) is
connected.
• The
button can be used only when the optional Bluetooth
INTERFACE (KCE-400BT) is connected.
• If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
• When INT MUTE is set to ON, the Bluetooth setting cannot be made.
When the Bluetooth INTERFACE (KCE-400BT) is connected, set INT
MUTE to OFF. Refer to “Turning Mute Mode On/Off (INT MUTE)”
(page 21).
MUTE to OFF. Refer to “Turning Mute Mode On/Off (INT MUTE)”
(page 21).
Adjusting Source Signal Levels
If the difference in volume level between the CD player and FM radio is
too great, adjust the FM signal level.
too great, adjust the FM signal level.
Changing Lighting Colour
TYPE1
TYPE2
TYPE3
TYPE4
TYPE5
You can change the lighting colour of the following six buttons.
SOURCE/
SOURCE/
, BAND/TA,
,
,
,
.
Adjusting Display Contrast
You can adjust the display contrast for better visibility.
• The initial setting at the factory is “0”.
SETUP
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
modify. See the applicable section below for details
about the selected SETUP item.
Rotary encoder
/ESC
/ENT
F/SETUP
BAND/TA
SOURCE/
BLUETOOTH IN
BT IN ADAPTE / BT IN OFF (Initial setting)
Sound Customizing
FM-LEVEL HI (Initial setting) / FM-LEVEL LOW
Visual Customizing
ILLUMI TYPE1 (initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5
TYPE1: When the colour of the six buttons is blue, the colour of
the other is green.
TYPE2: When the colour of the six buttons is green, the colour of
the other is green.
TYPE3: When the colour of the six buttons is blue, the colour of
the other is red.
TYPE4: When the colour of the six buttons is amber, the colour
of the other is red.
TYPE5: When the colour of the six buttons is red, the colour of
the other is red.
CONTRAST
You can adjust in a range of -5 and +3.