SEAL AQUA AS-1600 사용자 설명서

 

 
 

15 

6.  Adjust Brake tension so that the material is pulling through smoothly with no 

wrinkles. 

 

 

 

7.  When the media being coated comes to an end, the last piece will loose tension;  

you will need to manually provide back-tension as the media runs out. 

8.  Approximately 1.6M (5 ft) prior to the last piece of media going past the Draw 

Down Assembly the Flow control valve at the Applicator Nozzle should be 
closed. 

9.  Once the material is through the Dryer Panel, the Dryer switch should be turned 

OFF. 

10. The finished material is easily unloaded by swinging the Take-up Mandrel out 

and slipping the finished roll off the mandrel.