SEAL AQUA AS-1600 사용자 설명서

Section 2. Operating Procedures

3. Web the Laminator

A Web diagram is provided in Figure 2.3 Below

Figure 2.3 Web Diagram

Method

1. Lift Unwind Assembly to the UP position.

2. Load a take-up core onto the Take-up Mandrel and align with the edge of the

roll of media on the Unwind Mandrel.

3. Pull media up over the web Idler, under the Draw down Assembly and under

the Dryer Assembly to the Take-up Core.

4. Tape material to the Take-up core.

Note: It is important to get the material as straight as possible to ensure a

minimal amount of “telescoping” on the Take-up Roller.