SEAL AQUA AS-1600 사용자 설명서
Safety Information
4
Intended Use
The AquaSEAL™ AS-1600 liquid laminator is intended for use with medium and
large format graphic output. Graphics can vary in widths up to 1.6M (5 ft.) in width
and can be up to 90M (295 ft.) in length (dependent on thickness of media used).
The AquaSEAL™ AS-1600 liquid laminator is intended for use with AquaSEAL™
water based sealant only. Use of solvent-based or other manufacturers sealants
may damage the machine and may void any warranty.
large format graphic output. Graphics can vary in widths up to 1.6M (5 ft.) in width
and can be up to 90M (295 ft.) in length (dependent on thickness of media used).
The AquaSEAL™ AS-1600 liquid laminator is intended for use with AquaSEAL™
water based sealant only. Use of solvent-based or other manufacturers sealants
may damage the machine and may void any warranty.
Safety Instructions
Caution
When handling any chemical products, read the manufacturers’ container labels and
the Material Safety Data Sheets (MSDS) for important health, safety, and
environmental information.
the Material Safety Data Sheets (MSDS) for important health, safety, and
environmental information.
To obtain MSDS Sheets for AquaSEAL™ Products, Please call your local distributor.
In case of emergency, please telephone: +44 (0)1268 530 331 Europe, or
(800) 486-6502 USA
When using any equipment, always follow the manufacturers’ instructions for safe
operation.
operation.
Warning
Avoid contact with heat source during use. Wear heat resistant gloves and safety
glasses. Failure to avoid contact with hot surfaces may cause burns. Always
observe manufacturers recommendations when handling chemicals.
glasses. Failure to avoid contact with hot surfaces may cause burns. Always
observe manufacturers recommendations when handling chemicals.