SEAL AQUA AS-1600 사용자 설명서

 

 

 

q 

Do not operate the machine until it is connected to the proper power source.  
Refer to Installation instructions located inside control cabinet. 

q 

It is strongly recommended that the machine is fed from an “Earth Leakage” 
protected electrical outlet  – if in doubt, please contact Hunt Technical Services 
(contact details in “Miscellaneous” section at the rear of the manual) or consult a 
licensed electrician. 

q 

Familiarize yourself with the layout of the Control Panel, and with the operation of 
the sealant delivery system. 

q 

Do not wear loose clothing, and contain loose hair to avoid becoming entangled 
with moving parts of the machine. 

q 

Comply with all safety warning signs, labels, and instructions. 

q 

Operators should be trained on the proper use of the machine and all safety 
procedures. 

q 

Provide fresh water, clean towels and rubber gloves for use during cleanup. 

q 

It is advisable to wear eye protection when filling/emptying sealant tank. Always 
Provide an approved emergency eyewash station adjacent to the machine. 

 

Figure 1 shows the safety labels that appear on the AquaSEAL™ AS-1600. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Figure 1.  Safety Labels