High End Systems Technobeam 사용자 설명서

4-4

Technobeam

®

 User Manual

Selecting Constructs and Values

The step-by-step example in the next section suggests particular 
constructs and values that will give you an idea of how the fixture 
works.  You can choose different constructs or values using the 
information in Appendix E.

This step-by-step example involves the following basic steps:

•

Positioning and powering on the fixture

•

Turning on the lamp

•

Opening the shutter

•

Focusing on a litho

•

Selecting color and effects options

•

Enabling preset playback

1.

Orient (physically position) the fixture so the light will be projected 
onto a flat, light-colored object such as a white wall or ceiling.  If you 
have Technobeam, you will be able to move the mirror to a suitable 
position.

2.

Follow the instructions in Chapter 1 to connect the fixture to an 
appropriately-rated power outlet, if you have not already done so.  
(There is no power switch.)  Wait for the fixture to finish homing (the 
gears and motors stop moving).

1.

Press and hold the <Menu> key until ADDR appears in the LED display.

If you are already in the menu system, keep pressing 
(but do not hold down) the <Menu> key until ADDR is 
displayed.

If MENU is displayed, press the <Enter> key to view the 
ADDR 

option.

2.

Use the <Up> and <Down> arrow keys to navigate to the TEST menu.

3.

Press <Enter>, then use the <Up> and <Down> arrow keys to navigate 
to the LAMP option.