High End Systems Technobeam 사용자 설명서

3-22

Technobeam

®

 User Manual

The self tests will run continuously until you press the 
<Menu> button to exit the test.

Placing the Fixture in Setup Mode (S/UP)

This menu item allows you to place the fixture in setup mode so that 
you can mechanically home your fixture.  If the fixture is out of home 
(i.e., the iris or dim flags lose position), will emit an unusually loud 
clicking noise when strobing or electronically homing.  For more 
information on how to mechanically home the fixture, contact High 
End Systems customer service.

To place the fixture in setup mode:

1.

Press and hold the <Menu> button until “ADDR” appears on the LED 
display.

2.

Using the <Up> and <Down> arrow buttons, scroll to the “TEST” menu 
and press the <Enter> button to select the “TEST” menu.

3.

Using the <Up> and <Down> arrow buttons, scroll to the “S/UP” option 
and press the <Enter> button to select the “S/UP” option.  

4.

When the LED displays “SET NOW,” mechanically home the fixture.

5.

After mechanically homing the fixture, press any button.  This causes 
the fixture to electronically home. 

Testing the LED Display (DISP)

To perform a self-test on the alphanumeric LED display:

1.

Press and hold the <Menu> button until “ADDR” appears on the LED 
display.

2.

Using the <Up> and <Down> arrow buttons, scroll to the “TEST” menu 
and press the <Enter> button to select the “TEST” menu.

3.

Using the <Up> and <Down> arrow buttons, scroll to the “DISP” option 
and press the <Enter> button to select the “DISP” option.  The LED will 
run through its self test.

4.

Press the <Menu> button to exit the test.

The self test will run continuously until you press the 
<Menu> button to exit the test.

The Information menu allows you to view current fixture information 
such as internal temperature, lamp hours, total fixture hours, lamp 
strikes, software version, DMX errors, sensor information, and DMX 
data for any other device on the link.  You can also reset the lamp