Elica EFG630SM 설치 설명서

Closely follow the instructions set out in this manual.
All responsability  for any eventual inconveniences, damages or fires caused by not complying with the instructions in this 
manual, is declined.

The hood is equipped with a transition B discharge of fumes to the outside (Ducting version).

Should it not be possible to discharge cooking fumes and vapour  to the outside, the hood can be used in the Ductless 

(Recirculating) version. Attach a charcoal filter and the deflector F on the duct cover support bracket G. Fumes and vapours 

are recycled through the top grille H by means of a duct connected to the transition B and the transtion mounted on the 

deflector F.

NOTE: For the ductless (Recirculating) version only: purchase the ductless recirculating Kit.

Minimum duct size (Ducting/Ductless version): 6” Round Pipe.

                                  

                                                                                     

                                 

Preparation

Do not cut a joist or stud only if absolutely necessary. If a joist or stud must be cut, then a supporting frame must be con-

structed.

Fitting material is provided to secure the hood to most types of walls/ceilings.

However, a qualified technician must verify suitability of the materials in accordance with the type of wall/ceiling.

Before marking cutots, make sure there is proper clearance within the ceiling or wall for exhaust vent.

Hood installation height above cooktop is the users preferecne. The lower the hood is adove the cooktop, the more efficient 

the capturingof cooking odors, grease and smoke.

CAUTION: FOR 8’ CEILING : MOUNT THIS HOOD SO THAT THE BOTTOM EDGE IS AT 30” (76,2 CM) MINIMUM ABOVE 

THE COOKING SURFACE.

FOR 9’ CEILING: MOUNT THIS HOOD SO THAT THE BOTTOM EDGE IS AT 36” (91,4 CM) MINIMUM ABOVE THE 

COOKING SURFACE.

CHECK YOUR CEILING HEIGHT AND THE HOOD HEIGHT MAXIMUM BEFORE YOU SELECT YOUR HOOD.

8

Roof pitch/w

Flashing and cap

Pipe

Transition (B)

Pipe

Transition (B)

Pipe

Transition (B)

sidewall cap

with gravity

damper

Defector (F)

Top grille (H)

Support bracket (G)

Vertical Discharge

Recirculating