XO XOMA08 지침 매뉴얼
Makeup Air System (XOMA)
Install and Dimensions Sheet – RESIDENTIAL USE ONLY
ventilation
FOR PLANNING PURPOSES ONLY. PLEASE REFER TO INSTALL GUIDE FOR DETAILED INSTRUCTIONS
.
XOMA Switch Assembly and Collar Specifications:
Unit Specifications
Weight: 1.5 lbs, 16 AWG x 2,
10A, 125VAC. Refer to safety
instructions prior to installation.
Weight: 1.5 lbs, 16 AWG x 2,
10A, 125VAC. Refer to safety
instructions prior to installation.
2”
6”
3 ‐1/4”
XOMA Motorized Fresh Air Damper Specifications:
f
Unit Specifications
Weight: 3 lbs.
0.25 amps, 24 VAC, 60 HZ, 7 watts.
Shipped in normally closed position.
Weight: 3 lbs.
0.25 amps, 24 VAC, 60 HZ, 7 watts.
Shipped in normally closed position.
8”
2
¾”
2
5/8”
¾”
Diameter of XOMA
Motorized Fresh Air
Damper available
in 6”, 8” sizes.
2
¾”
24V low voltage wiring must be run at time of
rough‐in. (not included by manufacturer)
rough‐in. (not included by manufacturer)
The replenishment or
make‐up air must be
drawn from outside of the
home
make‐up air must be
drawn from outside of the
home
.
XOMA Fresh Air Damper in
normally closed position
normally closed position
3’
Outside fresh air inlet must be
installed on the exterior of the
house a minimum distance of
10ft from combustion vents and
other exhaust openings. Locate
the fresh air inlet away from any
outside motor, generator, pump,
BBQ grill, hearth/fire pit,
installed on the exterior of the
house a minimum distance of
10ft from combustion vents and
other exhaust openings. Locate
the fresh air inlet away from any
outside motor, generator, pump,
BBQ grill, hearth/fire pit,
XOMA Fresh Air Damper needs to be
located a minimum of 3ft from
kitchen exhaust hood.
located a minimum of 3ft from
kitchen exhaust hood.
During operation of the kitchen
exhaust, the motorized damper will
open to allow fresh outside air to
enter the home. When the exhaust
exhaust, the motorized damper will
open to allow fresh outside air to
enter the home. When the exhaust
24V Plug‐in
Transformer:
Input : 120VAC,
60 HZ, .23A
Output : 24VAC,
20VA
Transformer:
Input : 120VAC,
60 HZ, .23A
Output : 24VAC,
20VA
XOMA Switch Assembly
installed in rigid ducting
above ventilation hood
installed in rigid ducting
above ventilation hood
g
p
chemical storage area, or any
potentially hazardous exposure
area.
potentially hazardous exposure
area.
system is not in use the motorized
damper will close and no longer allow
outside air to enter.
damper will close and no longer allow
outside air to enter.
For general comfort and aesthetics,
the XOMA Fresh Air Damper intake
needs to be located in an area that
does not ventilate directly on or into
kitchen preparatory or dining areas.
the XOMA Fresh Air Damper intake
needs to be located in an area that
does not ventilate directly on or into
kitchen preparatory or dining areas.
For maximum performance, the XOMA Switch
Assembly needs to be installed directly above
the kitchen exhaust.
Assembly needs to be installed directly above
the kitchen exhaust.
Installation must completed by a certified installation expert or HVAC professional and must follow all local, state, and federal HVAC codes,
laws, standards, and regulations.
laws, standards, and regulations.
2