XO XOMA08 지침 매뉴얼
Installing the XOMA Switch Assembly:
24V electrical wiring extended from motorized
damper not included.
damper not included.
Install and Dimensions Sheet – RESIDENTIAL USE ONLY
ventilation
Makeup Air System (XOMA)
No additional Electrical Wiring Required:
The 24V Transformer can be plugged into
a 120V receptacle next to kitchen vent
hood for a convenient and aesthetic
i t ll
The 24V Transformer can be plugged into
a 120V receptacle next to kitchen vent
hood for a convenient and aesthetic
i t ll
Installing the XOMA Switch Assembly:
6”
damper not included.
XOMA Switch Assembly must be installed
in rigid ductwork.
in rigid ductwork.
install.
6
The recommended location for the XOMA Switch Assembly collar is
in a straight duct run directly above the kitchen exhaust fan motor.
in a straight duct run directly above the kitchen exhaust fan motor.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK HAZARD,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
1.
Shut off and disconnect all power supply to unit(s) prior to installation or service/repair of device.
2.
Use this unit only in manner intended by manufacturer.
3.
All applications of device must follow all applicable laws, codes, regulations, and standards.
4.
Installation of device must be completed by a certified installation expert or HVAC professional.
5.
For residential use only, any use beyond factory recommendations voids all warranties.
24V class 2 power
transformer connects to
motorized Fresh Air
Damper wire terminals #1
transformer connects to
motorized Fresh Air
Damper wire terminals #1
24 VAC Power
Line
Volts
Volts
Damper wire terminals #1
and #2.
and #2.
24 VAC Power
Transformer
Transformer
XOMA Motorized
Fresh Air Damper
Fresh Air Damper
XOMA switch assembly
connects to motorized
Fresh Air Damper wire
terminals #2 and #3.
connects to motorized
Fresh Air Damper wire
terminals #2 and #3.
XOMA Switch
Assembly
Assembly
3