Vinotemp VT-32SN 사용자 설명서

This wine cellar is built with a reversible door. You have the choice of 
either opening it from the left or the right side. In order to reverse the 
opening direction of your door, please follow these simple instructions. 
 
CAUTION:  To avoid personal injury  to  yourself  and/or  property, 
we recommend someone assist you during the door reversal 
process. 
 
 
1.  Remove the top hinge assembly and 

keep for later use. 

2.  Remove the plug buttons from the 

left holes on the top of the cabinet 
and transfer them to the uncovered 
holes at the right side. Be sure to 
press the plug buttons firmly into 
the holes. 

3.  Remove the door assembly and keep 

for later use. 

4.  Remove the right bottom hinge and 

left bottom hinge and install them on 
the opposite sides. 

5.  Re-install the door assembly with 

the door handle on the opposite side 
(rotating the door 180°). Make sure 
the door assembly is properly 
aligned on the cabinet. 

6.  Re-install the top hinge assembly 

previously removed in step 1 on the 
opposite side and tighten all 
necessary screws. 

 
 
 
 
Note: 1.  It is recommended to change the door swing before installation. 

2. Please remember, do not power up the unit for 48 hours after 

cabinet has been out of an upright position to allow the coolants 
to settle inside the compressor. 

3. Always unplug and empty the wine cellar before reversing door 

and secure any loose items (shelves) for safety. 

 

10