Vinotemp VT-32SN 사용자 설명서

1.  Gently place/slide the racks into the wine cellar. 
2.  Determine the best temperature setting to use. 
3.  Place bottles inside the cooler. 
4.  Plug the power cord into a standard grounded electrical outlet. 
5.  Limit the frequency of opening the door to conserve energy and 

maintain proper storage temperature. 

6.  You can turn the interior light on and off by touching the button 

labeled with a light on the front control panel. 

 

Important:  When using the wine cellar for the first time, allow at least 
24 hours for the internal temperature to adjust properly. Make sure there 
are at least 3 to 5 bottles in the unit. 
 

 
Important: In order to operate efficiently, this product should be 
in an environment with an ambient temperature of less than 90°F 
(32°C). 
 
Temperature preset: 
For your convenience, the wine cellar is programmed at storing 
temperature. The temperature pre-set by the manufacturer is 54°F 
(12°C). 
 
Setting the temperature: 
You can manually adjust the temperature. Simply press the 

“   ”  button 

on the control panel to decrease the temperature and the 

“   ” button to 

increase the temperature by 1 degree increments inside the wine cellar. 
The temperature range for this unit is from 45°F (7°C) to 65°F (18°C). 
 
When the cabinet temperature is too low, the LED will display “LL”. When 
the temperature is too high, it will display “HH”. The “ER” display shows 
when there has been a power disruption. 
 

9 

 
 

1 7 6 3 1   S o u t h   S u s a n a   R o a d ,   R a n c h o   D o m i n g u e z ,   C a l i f o r n i a   9 0 2 2 1  

i n f o @ v i n o t e m p . c o m