Mellerware 30100 75 - 550 W 사용자 설명서

Safety Instructions
• This appliance is not intended for use by

persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or instruc-
tion concerning use of the appliance by a
person responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

• The below instruction is mandatory for hand

mixers, blenders, choppers, etc, that have
moving and interchangeable parts such as
blades.

• Switch off the appliance and disconnect

from supply before changing accessories or
approaching parts that move in use.

• The machine should always be placed in a

horizontal sturdy surface and the distance
between the machine and the wall should
be over 10cm.

• Do not place or store the appliance where it

can be pulled or fall into a tub of sink.

• Do not reach for an appliance that has fallen

into water. Unplug immediately.

• Ensure that you use a non-poison plastic

bottle. Warning: before you switch on the
power, press the hot water faucet, make sure
water flows out in order to avoid
burning the elements.

• When cleaning the appliance, disconnect

from the power socket. Never immerse the
appliance in water or pour water on it. Also
avoid using gas or organic solvent.

• Never operate this appliance if it is damaged

or dropped into water. Return the appliance
to a service centre for repairing.

• Keep the cord away from heating surfaces.
• The appliance should never be left unat-

tended when plugged in or operating.

• Use this appliance only for its intended use

as described in this manual.

• Do not replace the mains supply lead into

the appliance – always use an authorized
representative or qualified technician.

• Clean and change the water if you have not

used the appliance for a while, or before the
first use.

• If the cord or the appliance is damage, do

not attempt to repair. Please contact the
manufacture or retailer.

Getting Started with your Hot & Cold Water 
Dispenser: Warning: Handle your appliance
with care to avoid damage during delivery and
using. Ensure to follow the instructions on this
manual when assembling the appliance.

Instructions for use:
1. Remove the exterior and interior packaging.
2. Locate the appliance in a sturdy horizon-

1.  Water Guard
2.  Water Tank
3.  Top Cover
4.  Side Panel
5.  Red light for cold water
6.  Hot Ware Taps
7.  Hot Water

8.  Cold water taps
9.  Drip tray
10. Hot & cold switch
11. Heat emission hole
12. Dispenser base angle
13. Blown valve
14. Electric cooling fan

_IM.indd   2

1/28/2014   1:45:12 PM