TP-LINK TD-VG3631 사용자 설명서

 

49 

• 

WEP Key - Select which of the four keys will be used and enter the matching WEP key that 
you create. Make sure these values are identical on all wireless stations in your network. 

 

• 

 

- You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption. 

"Disabled" means this WEP key entry is invalid. 

 

You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is 

not promoted) or 5 ASCII characters.   

128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is 
not promoted) or 13 ASCII characters.   

152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is 
not promoted) or 16 ASCII characters.   

)

If you do not set the key, the wireless security function is still disabled even if you have selected 
Shared Key as Authentication Type.

 

¾

 

WPA-PSK /WPA2-PSK: It’s based on Radius Server. 

• 

 

- you can choose the version of the WPA security on the drop-down list. The 

default setting is Auto, which can select

 

WPA (Wi-Fi Protected Access) or WPA2 (WPA 

version 2) automatically based on the wireless station's capability and request. 

• 

 

You can select either Auto, or TKIP or AES. 

• 

PSK Password - You can enter ASCII characters between 8 and 63 characters or 8 to 64 
Hexadecimal characters. 

• 

Group Key Update Period - Specify the group key update interval in seconds. The value 
should be 30 or above. Enter 0 to disable the update. 

Be sure to click the Save button to save your settings on this page. 

Choose menu “Wireless” Æ ”MAC Filtering”, you can control the wireless access by configuring 
the Wireless MAC Filtering function, shown in Figure 4-31. 

 

Figure 4-31 

To filter wireless users by MAC Address, click Enable. The default setting is Disabled. 

¾

 

MAC Address: The wireless station's MAC address that you want to filter.   

¾

 

Status: The status of this entry, either Enabled or Disabled.