TP-LINK 1910010350 사용자 설명서

 

-69- 

¾

  Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering. 

¾

  UDP-FLOOD Packets Threshold (5~3600)  - The default value is 500. Enter a value 

between 5 ~ 3600. When the current UPD-FLOOD Packets number is beyond the set value, 

the Router will startup the blocking function immediately. 

¾

  Enable TCP-SYN-FLOOD Attack Filtering  - Enable or Disable the TCP-SYN-FLOOD 

Attack Filtering. 

¾

  TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value 

between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the 

set value, the Router will startup the blocking function immediately.   

¾

  Ignore Ping Packet From WAN Port - Enable or Disable Ignore Ping Packet From WAN 

Port. The default setting is disabled. If enabled, the ping packet from the Internet cannot 

access the Router.   

¾

  Forbid Ping Packet From LAN Port - Enable or Disable Forbid Ping Packet From LAN 

Port. The default setting is disabled. If enabled, the ping packet from LAN cannot access 

the Router. This function can be used to defend against some viruses.   

Click the Save button to save the settings. 

Click the Blocked DoS Host List button to display the DoS host table by blocking.   

Choose menu “Security  → Local Management”, you can configure the management rule in 

the screen as shown in Figure 4-46. The management feature allows you to deny computers in 

LAN from accessing the Router. 

 

Figure 4-46 Local Management