Netopia R2020 사용자 설명서

Once you’ve connected your router to your computer and your telecommunications line and installed a web 
browser, you’re ready to run the Netopia Smar tStar t™ Wizard. The Smar tStar t Wizard will help you set up the 
router and share the connection. The Smar tStar t Wizard walks you through a series of questions and based on 
your responses automatically configures the router for connecting your LAN to the Internet or to your remote 
corporate network.

The Smar tStar t Wizard will:

■

automatically check your Windows 95, 98, or NT PC’s TCP/IP configuration to be sure you can accept a 
dynamically assigned IP address, and change it for you if it is not set for dynamic addressing

■

check the physical connection from your computer to your router without your having to enter an IP address

■

assign an IP address to your router

■

allow you to register with a new ISP if you don’t already have one. For a list of ISPs that suppor t Netopia 
Routers in Nor th America, see the Netopia website at http://www.netopia.com.

■

allow you to enter your dial-up telephone numbers and other information, dial up and test your connection 
to your chosen ISP or other remote site

Be sure you have connected the cables and power source as described in Step 1 “Connect the Router” guide 
contained in your Netopia folio.

Before you launch the Smar tStar t application, make sure your computer meets the following requirements: 

PC

Macintosh

System 
software

Windows 95, 98, or NT operating system

MacOS 7.5 or later

Connectivity 
software

TCP/IP must be installed and properly 
configured. See 

MacTCP or Open Transpor t TCP/IP must be 
installed and properly configured. See 

Connectivity 
hardware

Ethernet card (10Base-T)

Either a built-in or third-par ty Ethernet card 
(10Base-T)

Browser 
software

Netscape Communicator™ or Microsoft Internet Explorer, included on the Netopia CD. 
Required for web-based registration and web-based monitoring.