Adaptec 39106 사용자 설명서

SCSI hard disk drives running under other operating systems, 
see the operating system documentation.

■

We recommend that you connect your LVD (Ultra160 and 
Ultra2) SCSI devices to SCSI Channel B and your non-LVD 
SCSI devices (if any) to SCSI Channel A. This allows the LVD 
SCSI devices to run at their maximum performance levels of 
160 MBytes/sec or 80 MBytes/sec. Or you can connect LVD 
SCSI devices to both SCSI channels. If you combine LVD and 
non-LVD SCSI devices on the same SCSI channel, the data 
transfer rate of the LVD SCSI devices will drop down to non-
LVD SCSI performance levels of up to 40 MBytes/sec.

■

Internal Ultra2 and Ultra160 SCSI devices come from the fac-
tory with termination disabled and cannot be changed. Proper 
termination is provided by the terminator at the end of the 
internal LVD SCSI cable.

If you connect a scanner to the Adaptec SCSI Card 39160, you must 
install the scanner manufacturer’s proprietary software drivers. See 
your scanner’s documentation for details.

68-pin internal LVD/SE
connector Channel A

68-pin internal LVD/SE
connector Channel B

68-pin external 
LVD/SE connector
Channel B

68-pin external 
LVD/SE connector
Channel A

Channel A

Narrow
connector