Compaq NX7000 사용자 설명서
Removal and Replacement Procedures
Maintenance and Service Guide
5–45
2. Disconnect the SD Card slot board cable 1 from the system
board.
3. Remove the PM2.5×5.0 screw 2 that secures the SD Card
slot board cable ground loop to the base enclosure and the
PM2.5×5.0 screw 3 that secures the system board to the base
enclosure.
PM2.5×5.0 screw 3 that secures the system board to the base
enclosure.
Removing the System Board Screws
325388-002.book Page 45 Friday, October 24, 2003 9:21 AM