Whirlpool W10388776A-SP Manual Do Utilizador

1. Remove the door strike from the dryer door opening.

2.  Remove the cosmetic screw opposite the door strike.

  

 

 

          A. Door strike 

B. Cosmetic screw

3.   Reinstall the door strike and cosmetic screw on the opposite 

side of dryer door opening from where they were removed.

      

noTE: Door strike and plugs must be on the same side of the 

dryer door opening.

1. Remove the 4 screws and two hinges from the dryer door.

. Replace the 4 screws in the same holes

3.  Remove the 4 screws from the opposite side of the door.

You can change your door swing from a right-side opening to a 

left-side opening, if desired.

1.  Place a towel or soft cloth on top of dryer or work space to 

avoid damaging the surface.

1. Open the dryer door.

2.  Remove the bottom screw (B) from each of the two hinges that 

attach dryer door to front panel of dryer.

3.  Loosen the top screw (A) from each of the two hinges  

in Step 2.

4.  Remove the dryer door and the hinges by lifting upward on the 

door. Lay the door on a flat, covered surface, with the inside of 

the door facing up. Remove remaining two loose screws from 

dryer front panel.

  Remove the 4 plastic plugs located outside the dryer 

door opening.

6.  Install 4 plastic plugs into screw holes in the dryer left where 

the hinges were removed in Step 4.

  

 

 

          A. Top screw 

B. Bottom screw