Fujifilm 4900 Manual Do Utilizador

121

120

X AF

Remove the protection.

• If the shot is too dark, move at least 2 m

away from the subject and try again.

• Use AF lock to take the picture.

A protected frame was erased.

The AF (auto focus) cannot work
effectively.

The shot can be taken, but the exposure will
not be correct.

Outside the AE continuous
range.

Use flash photography. However, a tripod
should be used for some scenes and modes.

There is a strong likelihood of
camera shake because the
shutter speed is slow.

• Camera malfunction or fault.

When you erase the image, the DPOF
settings for that image are deleted at the
same time.

Press the MENU/OK button to create a new
DPOF file and specify all the DPOF settings
again.

• Switch the camera on again, taking care not

to touch the lens.

• Turn the camera off and on again a few times.

If this does not resolve the problem, contact
an authorized FUJIFILM service center.

Prints were specified for more
than 1000 frames in the DPOF
frame settings.

The maximum number of frames for which
prints can be specified on the same
SmartMedia is 999.

The image you tried to erase
has a DPOF print setting.

The DPOF file contains an error.
Alternatively, the DPOF file was
set up on a different device.

The camera battery is low on
charge.

No SmartMedia is loaded, or it is
loaded incorrectly.

The SmartMedia is not formatted.

Replace or recharge the battery.

Load the SmartMedia (3.3V) in the correct
direction.

Format the SmartMedia.

• The SmartMedia terminals are

soild.

• The SmartMedia is damaged.
• The SmartMedia format is

incorrect.

Wipe the contact area on the SmartMedia
with a soft dry cloth. It may be necessary to
format the SmartMedia. If the error message
is still displayed, replace the SmartMedia.

The SmartMedia is fully recorded. Erase some images or use a SmartMedia

that has ample free space.

The SmartMedia is write-protected. Use a SmartMedia that is not write-

protected.

Switch the Frame NO. Memory function off
and use a formatted SmartMedia to take the
picture.

The frame number has reached
999-9999.

An attempt was made to playback
a frame not recorded on this
camera.

Images cannot be played back.

(Lit red)

e The table below lists the warnings that are displayed on the LCD monitor

(Lit red)