Honeywell TH8320 Manual Do Utilizador

68-0280—01

4

1. Read these instructions carefully. Failure to follow the 

instructions can damage the product or cause a hazard-

ous condition.

2. Check the ratings given in the instructions to make sure 

the product is suitable for your application.

3. Installer must be a trained, experienced service 

technician.

4. After completing installation, use these instructions to 

check out the product operation.

Install the thermostat about 5 ft. (1.5m) above the floor in an 

area with good air circulation at average temperature. See 

Fig. 5. 

Do not install the thermostat where it can be affected by:

— Drafts or dead spots behind doors and in corners.

— Hot or cold air from ducts.

— Radiant heat from sun or appliances.

— Concealed pipes and chimneys.

— Unheated (uncooled) areas such as an outside wall behind 

the thermostat.

Disconnect power before wiring.

The thermostat can be mounted horizontally on the wall or on 

a 4 in. x 2 in. (101.6 mm x 50.8 mm) wiring box.

1. Position and level the wallplate (for appearance only).

2. Use a pencil to mark the mounting holes.

3. Remove the wallplate from the wall and, if drywall, drill 

two 3/16-in. holes in the wall, as marked. For firmer 

material such as plaster, drill two 7/32-in. holes. Gently 

tap anchors (provided) into the drilled holes until flush 

with the wall.

M4465

4-5/8
(117)

4-5/8
(117)

2-3/4  (70)

2-3/4  (70)

1-1/8 

(29)

3-1/4

(83)

5 FEET

[1.5 METERS]

YES

NO

NO

NO

M19925