Lucent Technologies Release 6 Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Test the System
Page 4-8
Test Expansion Interface Circuit Packs
4
Test Expansion Interface Circuit Packs
1. Verify the screen displays:
Command:
2. Type test board < UUCCss>
(where UUCCss is the cabinet, carrier, and
slot for an expansion interface circuit pack in the system) and press
Enter
.
Labels on the port network and carrier containing the board and the label
on the strip under the board contain this information.
on the strip under the board contain this information.
NOTE:
Circuit pack positions are usually given by cabinet, carrier (within
cabinet), and slot (within carrier). They may also be given by port
(within slot). The term “cabinet” refers to one Multi-Carrier Cabinet
making up one port network. A port network is defined as a group of
cabinets connected together with one TDM bus.
cabinet), and slot (within carrier). They may also be given by port
(within slot). The term “cabinet” refers to one Multi-Carrier Cabinet
making up one port network. A port network is defined as a group of
cabinets connected together with one TDM bus.
3. Verify the screen displays test results similar to
Screen 4-7
. This example
is for circuit pack 1C03.
Screen 4-7.
Example Test Board 1C03
4. If any result is FAIL, check the connections for the associated fiber optic
link.
5. Repeat Steps 2 and 3 for each circuit pack in the system.