Jacuzzi J - 400 Manual Do Utilizador

Page 83

12.  Open/Close Front Panel
 

Press firmly on the release button (15), then open front panel (16) by 
gently lifting upward on bottom edge. To close front panel, gently flip 
panel down, then press firmly on panel directly above release button 
(15) until you hear an audible “click”. Keep front panel closed at all 
the times to prevent water intrusion, except when changing discs. 

nOTe: Never insert wet discs into unit or CD player will be damage!

1.  radio Operation.

 

Press MODE button (4) to select Radio mode. Station frequency is 

indicated on display. 

To Select Band: Press BAND button (8) repeatedly to scroll through 

• 

radio mode as follows: FM1 --> FM2 --> FM3 --> AM1 --> AM2 

-->FM1. Each radio band stores up to 6 independent stations, for a 

total of 18 FM and 12 AM presets.

To Program 

• 

Station Presets in Radio mode: Press and hold SH 

button (9) until display reads “SHIFT”. Immediately afterwards, press 

and hold the Tune up/down button (2) for 2 seconds, then repeatedly 

press to select preset 1 to 6. At desired preset, press the ENT button 

(9) to store current frequency into selected preset. 

note: When power to spa is shut off for any reason, all station presets 

are reset.

2.   automatically setting station Presets

 

Press and hold the AS/PS button (6) for approximately 2 seconds 

until you hear a beep that confirms the memory function is engaged. 

The unit will search for six strong stations and automatically store 

them on the current band. All 18 FM and 12 AM presets can be set 

sequentially by selecting the next band and continuing the operation 
during auto programming.

3.  seek/manual Tune

 

Press TUN up/down button (2) once to activate manual tuning 

mode, then press TUN up or down repeatedly to manually increase 
or decrease displayed frequency. Press and hold either TUN up or 
down button (2) for at least 2 seconds to activate auto tuning mode. 
The unit will automatically search and stop at the next higher or 
lower station with sufficient signal strength. 

4.   Preset scan Function
 

Press AS/PS button (6) once to enter scan mode. Each preset 
station in the current band will play for 5 seconds while the preset 
number is flashes on the display (17). At the desired station, press 
AS/PS button (6) a second time.