Jacuzzi J - 400 Manual Do Utilizador

Page 84

5.   accessing Preset stations
 

Press and hold ENT/SH button (9) until 
display reads “SHIFT”. Repeatedly press 
TUN up or down button (2) to choose 
preset 1-6, then press ENT/SH button 
(9) to confirm selection.

1.   insert, Play, and eject a CD

 

Open front panel (16) by pressing firmly 

on release button (15) and lifting panel upward from bottom edge. 

Gently insert CD into slot (14) with label facing up. The CD will be 

drawn inside by the motorized mechanism. DO NOT FORCE! Close 

front panel by folding down, then press firmly on panel directly 

above release latch (15) until you hear an audible “click”. Keep front 

panel closed at all the times to prevent water intrusion, except when 

changing discs. CD playback will automatically begin after CD is 

loaded. A “S-CDP” icon on the display indicates that a disc is inside 

the mechanism.

To Play CD: Press the MODE button (4) to change to CD mode. 

• 

The CD will play. The display shows current track, play time, and 

animates a 3-D rotating disc during playback.

To Remove CD: Open the front panel and press CD eject button 

• 

(13). Remove CD from drive and close front panel as instructed in 

step 12 (page 83).

2.   Changing CD Tracks and music seek
 

To advance to next track, press TUN up button (2) once to increase 
track counter one track. When final CD track is reached, play will 
resume on track #1.
To fast forward through tracks: Press and hold TUN up button (2) 

• 

until track counter displays desired track, then release button.
To rewind current track: Press and hold the TUN down button (2) the 

• 

track will quickly rewind until you release the button.

note: It will go back to the beginning of the playing track when you press 

the Tune/Seek down button once, and it will go back to the previous track 

when you press the button once again.

Random Mode: Press SH button (9) to play the CD tracks in random 

• 

order. The left side of the display (17) reads “RDM” when random 

mode is enabled. Press a second time to deactivate.
Repeat Mode: Press BND button (8) to repeat current CD track. The 

• 

left side of the display reads “RPT” when repeat mode is enabled. 
Press a second time to deactivate.