Fujitsu MAS3367FC Manual Do Utilizador

7-4 

C141-E198 

 

Sense data (3-0C-03), (4-40-xx), (4-44-xx), and (4-C4-xx) indicate one of the following: 

• 

A target sector could not be detected using the sector counter. 

• 

A seek process overran the specified time. 

• 

A write to a disk terminated abnormally. 

• 

An error occurred in power-on self-diagnosis. 

• 

A hardware error occurred inside IDD. 

• 

A drive error occurred. 

 

The symptoms above are generally caused by an error in a PCA or DE. 

 

For details of the sense data above, refer to the Fibre Channel Interface Specifications. 

 

If sense data (1-1x-xx), (3-1x-xx) or (E-1D-00) occurs frequently in a specific block of a disk, there 
is disk damage that was not recorded in the media defect list.  In this case, assign an alternate block 
to the error-detected block using a REASSIGN BLOCKS command.  For an explanation of the 
REASSIGN BLOCKS command, refer to the Fibre Channel Interface Specifications. 

 

If this error occurs in different blocks, a PCA or DE is faulty. 

 

For details of the above sense data, refer to the Fibre Channel Interface Specifications. 

 

Sense data (5-2x-xx), (5-3D-00), (B-47-xx), (B-49-00), (B-4D-xx) and (B-4E-00) indicates one of 
the following symptoms: 

• 

An invalid or unsupported command was issued, or invalid or unsupported parameters were 
specified. 

• 

A SCSI error occurred. 

• 

A CRC error occurred in the fibre channel loop. 

 

If this error occurs, a PCA or the fibre channel interface is faulty. 

 

For details of the above sense data, refer to the Fibre Channel Interface Specifications.